Apollo AGC DSKY Raspberry Pi Powered Replica

Share your electronics related projects, builds, ideas and information here
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

I wired up the keyboard matrix which was a bit of trial and error for the end keys. The original design had no real schematic so I went by the code and figured it out.
IMG_4691.jpg
IMG_4691.jpg (187.54 KiB) Viewed 19010 times
Then I install the 3D printed keys and wow. I'm over the moon happy with the results.
IMG_4735.jpg
IMG_4735.jpg (187.48 KiB) Viewed 19010 times
IMG_4737.jpg
IMG_4737.jpg (180.42 KiB) Viewed 19010 times
IMG_4747.jpg
IMG_4747.jpg (137.52 KiB) Viewed 19009 times
Time to get it running some real Apollo code on the raspberry pi.
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

So the Raspberry Pi side of this is kicking my A$$. I have the Pi running virtualAGC just fine now and works awesome through the GUI but alas- I cannot get the Arduinos talking to it as the Python script doesnt work no matter what I try :( I posted a convo for Ron and others so fingers crossed those clever guys check out my sob story https://github.com/virtualagc/virtualag ... sions/1170

I totally forgot to post a pic of the backside of the LED board here. This is the best part! Check it out
IMG_4763.jpg
IMG_4763.jpg (156.13 KiB) Viewed 18990 times
Right? How cool is that
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

New video is up. Reflow soldered the new PCB assembly and it works GREAT! You already saw some picture here but the video is a bit more fun and shows the process for the board assembly and soldering. I will sell some kits of these if there is interest. I ordered enough LEDs to make many kits I think

I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

Did a shorts video too

https://youtube.com/shorts/2rnNpKKJuXs?feature=share

Also FYI my GIT Repo is fully updated with the instructions, links and info so others can make this. https://github.com/MKme/AGC_DSKY_Replica

This link will become quite important later: https://github.com/virtualagc/virtualag ... sions/1170

This is my discussion with Ron Burkey the creator of Virtual AGC. Without his help I may never have gotten the DSKY to work properly. In one day we powered through several show-stopping issues. Sometimes it just takes a discussion to get you motivated and looking under the right rocks. I am in his debt
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

New video is up! Finally have all the Arduinos and Pi happily talking :)

I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

LED panel PCB Kits are finally in my store! This was one of the hard parts of the DSKY build as there was no easy way to mount all the LEDs and make them look good. I have solved this for anyone who needs now :) https://store.mkme.org/?product=apollo- ... -led-panel
store.JPG
store.JPG (149.04 KiB) Viewed 18840 times
This should make it possible now for anyone with a 3D printer and some time to recreate this project. If you can actually get a Raspberry Pi of course.
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: Apollo AGC DSKY Raspberry Pi Powered Replica

Post by Eric »

Here is the previous update video I forgot to post here. It is added to the DKSY playlist on my channel

This weekend I'll finish and publish a new video detailing the software trials and tribulations. The GIT repo has been updated with all this info for a long time now but it takes many weeks to get the videos caught up to the readme :)
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Post Reply