ADSB Sharp

All things amateur radio including Software Defined Radio.
Post Reply
kwinly
Posts: 8
Joined: Tue Mar 25, 2014 4:30 am

ADSB Sharp

Post by kwinly »

Eric, sdrsharp.com is down. would you upload ADSB Sharp? They still offer SDR Sharp but nothing else. Would really appreciate it. Thanks
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ADSB Sharp

Post by Eric »

Here's a zip of the copy I have. Not sure if there are any "issues" with posting it up. If anyone has any information why it shouldn't be posted here- let me know and I'll remove.

https://dl.dropboxusercontent.com/u/898 ... bsharp.zip

Cheers
Eric
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
kwinly
Posts: 8
Joined: Tue Mar 25, 2014 4:30 am

Re: ADSB Sharp

Post by kwinly »

Thank You! I'm building a Coaxial Collinear Antenna from here http://www.balarad.net/
kwinly
Posts: 8
Joined: Tue Mar 25, 2014 4:30 am

Re: ADSB Sharp

Post by kwinly »

Thanks again
Image
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ADSB Sharp

Post by Eric »

Ha! Our coverage areas pretty much overlap. If you ever come North of Erie give me a shout :) Not far away at all.

Glad it helped.

Cheers
Eric
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
kwinly
Posts: 8
Joined: Tue Mar 25, 2014 4:30 am

Re: ADSB Sharp

Post by kwinly »

After updating my sdr sharp I saw they include adsb. but thanks for uploading.

I have a job near Rochester,NY in a couple weeks 10 week job. your launch area would be 5 hrs away. Maybe if its public and I'm available.
Although crossing into Canada is something I never did. I will need to get a passport.

Paul
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ADSB Sharp

Post by Eric »

Yep passport is required ;)

Cheers
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Post Reply