ResQ Search and Rescue

All ideas and projects relating to communication. Radio links, internet access, mesh networks, emergency communication, messaging, short wave/AM/FM transmitting etc.
Post Reply
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

ResQ Search and Rescue

Post by Eric »

So for nearly 2 years now I've been quietly working on a test system which can be installed in any aircraft, drone, quadcopter or RC plane and be used to locate lost people such as campers, hikers, medical emergencies etc.

I was inspired by the huge number of search and rescue cases on the TV show "North Woods Law" and every time I saw the difficulties tehy faced to find the lost people.

I noticed that these people often had a cell phone but it didnt work to contact the cell towers in the remote areas they were located. The handy part though- if the phone is on and wifi is turned on- the beacon packets would still be happening and I could sniff those.

using an ESP8266 I was able to sniff the beacon frames and detect any cell phone turned on in range. I wil document and share the project now for others to use and improve upon.

Stay tuned.
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Project has now been posted to Hackaday for easier distribution and instruction. I will maintain all docs and code on GIT but for now the whole project overview can be found here:

https://hackaday.io/project/172090-resq ... escue-tool

I also made a dedicated playlist for the videos/tutorials. Now it will make more sense the series of videos over the last year :)

https://www.youtube.com/playlist?list=P ... -9nNYl8QLr

GitHub Repo:

https://github.com/MKme/ResQ
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Lots of updates lately but TLDR the project now logs:

Detects all Beacons and their mac addresses within range
Detects All AP's in range (not needed but why not log them anyhow)
Gets GPS Lat/Long positioning
Gets GPS UTC Time
Logs all the above to the SD card .csv file every time any device detected changes
Displays the number of clients detected, APs detected, time and Lat/Long on the OLED screen live.


Coming along nicely. Updates posted in project logs on Hackaday
Eric
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Blog post is updated with project details here: http://blog.mkme.org/index.php/diy-sear ... e-arduino/

I updated the Hackaday project last night as I got KiCAD working! I was finally able to make some better schematic files and share them on GIT. This project is coming together nicely I think :)
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Schematic updated :)

Image
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Both Hackaday and Afruit links to the project. Love their support for these projects

https://blog.adafruit.com/2020/08/17/re ... -droneday/

https://hackaday.com/2020/08/12/resq-hu ... m-the-air/
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

FYI ResQ is indeed in the finals!
https://hackaday.io/contest/171491-supp ... -finalists

34 finalists :)
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Camera module is donee, code finished and uploaded! It works great!

Image
Attachments
ddd.JPG
ddd.JPG (188.45 KiB) Viewed 19554 times
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

I made a Google Form where you can also register your ResQ build which can let me send critical updates or info right to your email:

https://forms.gle/NGCYAjrD6iaDnZgL7

You can also share any info or pictures you like. This is at the request of people who dont use GIT and don't know how to make sure they have the latest info- no problem- I will send it to you :)

Good luck with all the builds that may happen out there someday!
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Eric
Posts: 316
Joined: Fri Feb 21, 2014 4:52 pm

Re: ResQ Search and Rescue

Post by Eric »

Hackaday prize was a bust. Not even a Tshirt or sticker.
Guess I should have slapped a heater on some rubber tubing ¯\_(ツ)_/¯
I make videos and content on all things electronics, 3D printing and DIY
http://www.mkme.org
https://www.youtube.com/mkmeorg
Post Reply